Thin Cladding Panels
thin cladding panels

KERROS Fire Panels – For 0.9m2 – Colour Options Available

£70.05

KERROS Fire Panels give the appearance of hand laid brick walls but with the convenience of easy installation and the benefit of huge cost savings.

This product is sold per box – £84.06 (£70.05 ex VAT).  Each box contains 3 panels and covers 0.9 m2.

  • x Clear selection

Product Description

THIN CLADDING PANELS

Our composite thin cladding panels have been designed and manufactured in the UK.  The brick slips are bonded to class ‘O’ fire rated cement particle board specially designed for fire walls and fireplace openings.  Quick and easy to install, the panels are indistinguishable from traditional brickwork.

These fire resistant, high performance composite panels are engineered to be thinner than faux brick alternatives.  They are water, frost and heat resistant and since the brick slips are made from reconstituted stone they will not ‘blow’ like traditional clay bricks are prone to.

THIN CLADDING PANELS – THE SMARTER CHOICE

A typical tradesman can fit around 8 m2 of loose brick slips a day.  With our thin cladding panels this could be as much as 40 m2.  If you factor in this rapid fitting time the panels are very much a cost effective option.

Once bonded and secured to a wall the brick slip facings are pointed.  Please use Refractory (Fire Cement) .  This means there are no visible joints.  Our panels can withstand temperatures ranging between -40 to 150 degrees Celsius therefore are suitable behind log/wood burners, gas and electrical fires as well as external use in new builds or property face lifts.

If used to clad the outside of a property or internally for a feature wall, your project is sure to impress.

PRODUCT INFORMATION:

  • Brick slips are pre-bonded to a composite 0.295 m2 Panel.
  • Thickness of Brick Slips & Panel together is 26 mm +/- 2 mm.
  • Rapid fixing, simply glue and screw.
  • Rear face of panel is flat and can be bonded to a variety of insulation materials.
  • No specialist skills or tools required.
  • Matching corners and singles are available to complete your project.
  • Temperature Range -40 to 150 Degrees Celsius.
  • One person installation.
  • Manufactured in the UK.

Per box: 0.9 m2 or 3 x panels.
Maximum boxes per pallet: 18 or 16.2 m2 (each pallet will incur a delivery fee).

DELIVERY & POSTAGE: See ‘Delivery Information‘ at the bottom of our website for pallet delivery fees per UK postcode area.

Coverage: Mainland UK (Quotes for pallet delivery fees for other areas of the UK, Europe and International destinations are available on request).

Typical delivery lead time for all UK deliveries is 7 – 10 working days.

For all orders of Brick Slip Panels over 30 m2 please contact us as delivery lead times maybe longer than stated above.

 

Additional Information

Colour Selection

Accent Classic Red, Accent Grey, Accent London Stock, Accent London Yellow, Accent Seal Grey, Accent Seasonal Blend, Antique Barnhouse Blend, Autumn Blend, Bespoke Brindle Blend, Bespoke Stormy Sky, Bespoke Sundown, New York Loft, Olde Cottage Blend, Reclaimed Antique Whitewash, Reclaimed Coastal Calm, Reclaimed Foundry Red, Reclaimed Metro Blend, Reclaimed Red Fusion, Reclaimed Rustic Antique

Panel size: 0.295m2 (660mm wide, 520mm high, 28mm thick)

Panel weight (per 0.295m2): 10kg (approx)

Pack Size: 0.9m2

Pallet specifications: 16.2m2 (18 boxes per pallet)

MATERIAL SPECIFICATIONS

Backing panel:

Class ‘O’ fire rating
Fully external/internal
Offers FSC Chain of Custody certification
Rot, moisture and impact resistance
CE marked
Bonding Adhesive: See Accessories on main category bar.

One part, chemically curing solvent free adhesive, combining the best qualities of silicone and polyurethane technologies.

Modulus at 100% Elongation (ISO 8339) >0.6MPa
Elongation @ break (ISO 8339) >60%
Tensile Strength (ISO 8339) >1.5MPa
Resistance to UV radiation: Excellent
Temperature Resistance -40 to +150˚C
Fitting Guide:

The boards should be mechanically fixed and glued to the substrate. The glue should be applied in horizontal lines to the back of the board, approximately 50mm apart.

A bead of adhesive should also be applied to the edges of the boards. This prevents cracking of the grout.

The pointing mortar should include a plasticizer and be suitable for the environment in which it is located.

Flat wall (no corners):

Similar to tiling, the panels should be fitted so that the bricks look evenly spaced between the edges. The panels can be cut to size with either a diamond blade or stone disc, similar to stone or brick.

Corners:

If the area to be covered includes external corners, start there first and work away from the corner. Matching corners (or pistols) are available to match the panels. The panel will require a small amount of trimming.